Valenite LLC has introduced two new tooling grades—expanding its targeted and application-specific lineup that allows users to better match machining operations and workpiece materials with tooling inserts for optimum production efficiencies, quality and economies. The new cutting technologies are the ValProTM VP8515 and VP8525 MT-CVD series of inserts. Both are being developed to augment the existing VP8535 grade and provide a complete range of turning capabilities for 304 and 316 stainless steels, Inconel and heat resistant alloys. The VP8515 is for finishing operations and the VP8525 is used for general duty semi-roughing/finishing. The existing VP8535 is for heavy metal removal tasks and roughing operations.
The VP8515 grade is set for high cutting speed (>200 m/min) at typical finishing
cut depths and has broad applicability with F5, M4, M6, M8, PM2, PM5 geometries. This grade is ideal for continuous turning of austenitic and duplex stainless steels at higher speeds providing reliable and predictable performance, with extended insert service life. Inserts using VP8515 grade have a thin yellow TiN outer coating for easy visual wear identification, an Al2O3 layer for thermal protection, a fine MT-CVD TiCN coating that helps to prevent flaking and reduces flank wear. Also incorporated in the tooling is a gradient area for added surface toughness, and a hard substrate offering greater resistance to wear and plastic deformation.
The TiCN/Al2O3/TiN coating is formulated specifically for turning of stainless steels and to resist sticking, notch wear and edge build-up, for enhanced hardness when hot.
The VP8525’s performance characteristics deliver high cutting speeds (>150 m/min) with mid- to large cutting depths...inserts have M4, M6, M8, R9, PM4, PM5 geometries to cover a myriad of cutting parameters. This grade is a basic choice for general duty M-class turning—continuous or intermittent cutting of austenitic and duplex stainless steels. These tools reduce the risk of plastic deformation and, like the VP8515, provide reliable performance and extended tool life. The VP8525 grade has similar coating technologies, layering and substrate construction as the finishing grade, including the TiCN/Al2O3/TiN coating for the efficient turning of stainless steels.
--------------------------------Get carbide inserts or cutting tools for stainless steel machining at www.pgstools.com. PGS sells cutting tools and carbide inserts from Korloy, Taegutec, Valenite, Iscar and generic carbide inserts online at discount prices.
0 Comments:
Post a Comment